Thursday, 30 October 2014


Two later Autokleans, both unused. The filters from the brass one are the same so this might get stripped down to repair a glass bowl one. The glass bowl one will probably go on a car that's lost its filter over the years.

Brake levers

Patterns for l/h and r/h front brake levers, and the castings ready for machining.

Brake rod adjusters

New brake rod adjusters. c/w threaded at one end, anticlock the other so when you turn them, both rods are pushed out, or pulled in.

Tuesday, 28 October 2014

Water pump patterns

This is a set of wooden patterns, made to slightly larger than the correct size to allow for shrinkage when the metal cools. They will go off to the foundry soon to have some sand moulds made for test casting.

New timing gears

New timing gears. Some are in brass, others are in steel. They alternate to keep the noise down. All my steel ones are OK, but the brass ones are all damaged so I need a set of those.

Monday, 20 October 2014

Cam Follower

Machining the first cam follower.